How to Tune Your Aquaponics Bell Siphon
Robbie the Plumber of The Aquaponic Source teaches you how to tune/balance your aquaponics bell siphon. Check out this link for aquaponics supplies: http://w…
6 Responses to How to Tune Your Aquaponics Bell Siphon
Leave a Reply to Robbie Vinson Cancel reply
Your water supply system needs improvement to make the supply consistent
and adjustment of the flow rate more accurate.
sandy7m
June 1, 2014 at 10:39 am
What’s wrong with my siphon? It stops at 3/4 level from bottom and fill up
the water again. It never reach to the bottom of grow bed.
Thanks in advance
Samuel Limawan
June 1, 2014 at 11:06 am
The siphon will break if you slow the flow..
Robbie Vinson
June 1, 2014 at 11:31 am
It does not have to drain quickly, this is not a speed thing. Larger tubing
is not necessary.
Robbie Vinson
June 1, 2014 at 12:29 pm
To make sure it drains quickly enough, should one use larger tubing for the
drain siphon?
Ben Rodman
June 1, 2014 at 12:52 pm
Help, I can’t get my siphon to break.
Godwin Tan
June 1, 2014 at 1:23 pm